# Finish nail definition and what finishing nails are

A plain definition of a finish nail, what finishing nails look like, how the small head and trim use differ from other nails, and where the nail head sits.

A finish nail is a slender carpentry nail with a small, slightly countersunk head that lets it sit close to the surface of trim. This page defines the finish nail, describes what finishing nails look like, and explains the nail head and trim work they suit. You get the definition first, then the details that make the finish nail easy to recognize. 

## Reading the shape of a finishing nail 

A finishing nail has a thin shank and a head that is noticeably smaller than a framing nail head. The head is slightly cupped or countersunk, so the nail can be driven close to the wood surface with a nail set. Finishing nails come in short lengths suited to thin trim, and the slim shank lowers the chance of splitting a narrow molding. Look for the small head and fine shaft when you sort nails in a tray. 

## Nail finish and the surface look 

The nail finish definition covers the surface treatment on the metal, such as bright steel, galvanized coating or a coating for exterior work. Finish also matters in the other sense of the word: a finish nail leaves a small hole that a filler can hide. Matching the filler to the trim color keeps the repair quiet to the eye. Choose a nail finish for the setting, since an exterior coating resists moisture while a bright finish keeps an interior look simple. 

## Trim work and where the head sits 

Trim carpentry uses finish nails to fasten baseboard, casing, shoe molding and similar thin profiles. The small nail head allows the nail to be set just below the wood surface, leaving a tiny opening for filler. Drive the nail with a hammer and use a nail set for the last part of the depth. Stop before the head tears the wood fibers, and leave structural fastening to a trained carpenter when a joint carries load. 

## Questions about finishing nails 

### What are finishing nails? 

Finishing nails are thin carpentry nails with a small countersunk head, made for fastening trim and thin woodwork. The slim shank and small head let the nail be set close to the surface without a large scar. They suit moldings and casings rather than heavy structural joints. A trained carpenter should handle any fastening that carries a load. 

### What's a finish nail compared with a framing nail? 

A finish nail is thinner and has a much smaller head than a framing nail, so it hides well in trim. A framing nail is built for structural timber and a larger head holds the joint. The two nails are not interchangeable, because each matches a different job and material. Use the finish nail for surface work and leave structural fastening to a trained carpenter. 

### What do finishing nails look like? 

Finishing nails look like slim steel rods with a tiny, slightly cupped head at one end and a point at the other. The head is smaller than the shank width of a framing nail, which makes the nail easy to overlook in a hand. Lengths stay short for thin trim, and the metal may carry a bright or coated finish. The small head is the feature to check when you pick one up. 

### Where does the nail head sit after driving a finishing nail? 

The nail head of a finishing nail sits just below the wood surface once the nail is set with a nail set. That small recess takes a dab of filler, which hides the fastening after sanding. Driving the head flush with a hammer alone can crush the wood fibers around the hole. Set the last part slowly and keep the head from breaking the surface.
