# Fusible interfacing for clothing: types and how to apply it

Learn what fusible interfacing is, which weight suits dresses, shirts and baby clothes, and how to iron it onto fabric so it bonds evenly.

Fusible interfacing for clothing is a stabilizing fabric coated on one side with heat-activated glue. Pressed onto the wrong side of a garment piece, it firms up collars, cuffs and facings. Below you will find the main types of iron-on interfacing and the steps for fusing it flat. 

## Woven, nonwoven and knit fusible types 

Fusible interfacing comes in three main constructions: woven, nonwoven and knit. Woven interfacing has a grain like regular cloth, so cut it on the same grain as the fabric. Nonwoven interfacing is made of bonded fibers and has no grain, which makes cutting quick. Knit interfacing, also called tricot, stretches with the garment and suits jersey or soft wovens. 

## Matching interfacing weight to the fabric 

The right interfacing for a garment matches the outer fabric in weight and drape, or is lighter. Interfacing that is too heavy makes seams stiff and can show as a ridge on the right side. For a dress in silk, rayon or lawn, a featherweight interfacing keeps necklines and facings soft. Medium weights suit shirt collars, while heavier grades give garment structure to coat fronts. 

## How to iron fusible interfacing to fabric 

Place the glue side of the interfacing, which feels rough or shiny, on the fabric's wrong side. Cover both layers with a press cloth, a thin protective fabric, dampened if instructions ask for steam. Press straight down with firm pressure, then lift and move the iron instead of sliding it. The right heat setting and pressing time depend on the specific interfacing product. 

## Fusible interfacing questions answered 

### Can you use fusible interfacing for baby clothes? 

Yes, fusible interfacing for baby clothes works when it is soft, lightweight and washable. A knit or featherweight interfacing keeps plackets, necklines and snap areas flexible. Check the care instructions so the interfacing tolerates the same wash and dry settings as the fabric. 

### Should you prewash fabric before applying fusible interfacing? 

Yes, prewashing the garment fabric before applying interfacing removes finishes and lets it shrink first. Sizing, a starch-like factory finish, can stop the glue from bonding firmly to the fibers. Some interfacing makers also suggest soaking or steaming the interfacing to preshrink it, depending on the product. 

### Why does fusible interfacing bubble after washing? 

Fusible interfacing bubbles when the glue did not bond fully or when the layers shrank differently. Too little heat, too short a press, or sliding the iron can leave weak spots in the bond. Letting the fused piece cool flat before moving it gives the adhesive time to set. 

### When should you use sew-in interfacing instead of fusible? 

Sew-in interfacing is the better choice for fabrics that cannot take the heat or steam of fusing. Velvet, sequined cloth, some synthetics and highly textured weaves can melt, flatten or show glue marks. Sew-in types are stitched to the seam allowances and stay soft, which suits fine dressmaking.
