How to make a cloth bag: handles, flat bottom and drawstring versions
A plain sewing guide to making a cloth bag from fabric: cutting the pieces, sewing handles, forming a flat bottom and adding a drawstring closure.
Contents
- Choose the fabric and cut the pieces
- Sew the body and close the sides
- Add a flat bottom by boxing the corners
- Make and attach the handles
- Build a drawstring closure
- Finish the top edge and press the bag
- Questions about making cloth bags
- What fabric works for a cloth bag?
- How do you make a cloth bag step by step?
- How do you give a cloth bag a flat bottom?
- How do you attach handles to a cloth bag?
- How do you make a cloth bag with a drawstring?
- Do you need a lining in a cloth bag?
You make a cloth bag from fabric by cutting a front, a back and the straps or casing, then sewing the sides and finishing the top edge. A flat bottom comes from boxing the lower corners, while a drawstring version folds a channel at the top and threads a cord through it. The same basic bag can carry handles, a flat base or a drawstring closure, depending on which finish you add.
- Cut two fabric panels plus strap or casing pieces before you sew anything.
- Sew the sides and base first, then box the corners for a flat bottom.
- Attach handles with a reinforced stitch square and a cross through it.
- A drawstring works through a folded casing with a gap left for the cord.
- Wash and press the cotton fabric before cutting so the bag keeps its shape.
Choose the fabric and cut the pieces
Cloth bag making starts with a fabric that holds a seam and takes pressing, such as cotton or a cotton blend. A firm weave keeps a tote bag upright, while a softer weave drapes and suits a drawstring pouch. Wash and press the fabric first so any shrinkage happens before you cut.
For a simple bag you need two panels of equal size, one for the front and one for the back. Add a seam allowance around every edge, and add extra height at the top for a hem or casing. A lining is a second pair of panels cut to the same size, sewn and turned inside the outer bag.
Mark the wrong side of the fabric with a line for each seam so you can follow it at the machine. Keep the grain of the fabric running straight down the bag, because a panel cut off grain twists when it hangs. Cut slowly and keep the scissors flat against the table for a clean edge.
Sew the body and close the sides
The body of a cloth bag is sewn with the right sides together, so the seams end up hidden inside. Pin the two panels along both sides and the base, then stitch with a straight stitch on the marked line. Backstitch at the start and end of each seam so the thread does not pull out.
Trim the seam allowance at the corners before you turn the bag right side out. A trimmed corner lies flatter and gives a sharper point once pressed. Press each seam open with an iron, then press the bag flat while it is still inside out.
A French seam hides the raw edges on an unlined bag and gives a tidy inside. Sew the seam wrong sides together, trim it close, then sew again right sides together to enclose the edge. This step takes longer but removes the need for a separate lining in a light fabric.
Add a flat bottom by boxing the corners
A flat bottom turns a flat cloth bag into one that stands and holds a boxy shape. Box the two lower corners by folding each corner into a triangle so the side seam meets the base seam. Stitch straight across the triangle at the depth you want the base to have.
Cut away the excess triangle above the stitching line and finish the raw edge with a zigzag or an overlock stitch. The wider the triangle, the deeper the flat bottom and the shorter the bag becomes. Measure the depth on both corners so the base sits level.
Press the new base seams open and turn the bag right side out. A flat bottom made this way works for a tote bag, a storage bag or a project bag. Test the bag on the table before you finish the top, because an uneven corner shows once the bag is filled.
Make and attach the handles
Handles for a cloth bag can be cut from the same fabric, bought as webbing or made from a folded strip. Fabric handles need a firm interfacing so they do not stretch when the bag is loaded. Cut two straps of equal length and width, allowing for a seam allowance on each long edge.
Fold each strap in half lengthwise with the right side in, stitch the long edge, then turn it right side out and press. Topstitch along both edges to keep the strap flat. Place the strap ends on the bag top, measure the same distance from each side seam, and pin them in place.
Sew each handle end with a square and a cross through the middle, which spreads the load over the fabric. Stitch over the join twice for strength, then finish the top edge with a hem or a facing. Check that both handles sit level before you sew the second one.
Build a drawstring closure
A drawstring closure is a folded channel at the top of the bag that holds a cord. Fold the top edge to the inside and stitch along the lower fold to make the casing. Leave a small gap in the stitching on each side so the cord can enter and exit.
Thread a cord through the casing with a safety pin and tie the ends together. A separate casing strip sewn onto the bag gives a stronger channel and lets you use a contrasting fabric. The channel needs enough width for the cord to slide without twisting.
For a lined drawstring bag, sew the lining to the outer bag at the top before you fold the casing. Leave a turning gap in the lining, turn the bag through it and press the top edge. Stitch the casing after turning so the channel sits on the outside of the bag.
Finish the top edge and press the bag
The top edge of a handled cloth bag needs a hem or a facing to stop the fabric from fraying. Fold the edge twice to the inside and stitch close to the fold, or sew a facing strip and turn it in. A hem of even width looks neat and gives the handle joins extra support.
Press the finished bag on the wrong side with a warm iron, working around the handles and the base. Pressing sets the seams and gives the bag a crisp shape. Check every seam for loose threads and clip them close to the stitch.
Give the bag a final look on all sides before you use it, with the handles pulled gently to test the joins. A cloth bag sewn this way can be repaired later by re-stitching a worn seam. Keep the pattern pieces so you can cut the same shape again.
Questions about making cloth bags
What fabric works for a cloth bag?
Cotton fabric works well for a cloth bag because it takes a seam, presses flat and holds a shape. A medium-weight cotton suits a tote bag, while a lighter cotton suits a drawstring pouch. Wash and press the fabric before cutting so the finished bag keeps its size.
How do you make a cloth bag step by step?
Making a cloth bag step by step means cutting two panels, sewing the sides and base, then finishing the top. Add handles, a flat bottom or a drawstring casing depending on the version you want. Press each seam as you go so the bag lies flat.
How do you give a cloth bag a flat bottom?
A cloth bag gets a flat bottom by boxing the lower corners, which means folding each corner into a triangle and stitching across it. Cut away the excess triangle and finish the raw edge. A deeper triangle gives a wider base and a shorter bag.
How do you attach handles to a cloth bag?
Handles attach to a cloth bag by pinning the strap ends to the top edge and stitching a square with a cross through it. Sew over the join twice so it carries weight. Place the handles the same distance from each side seam so the bag hangs level.
How do you make a cloth bag with a drawstring?
A cloth bag with a drawstring needs a folded casing at the top with a gap for the cord. Fold the top edge inside, stitch the channel and thread a cord through with a safety pin. A separate casing strip gives a stronger channel on a heavy fabric.
Do you need a lining in a cloth bag?
A lining is optional in a cloth bag and depends on the fabric and the finish you want. A lining hides raw seams and adds body to a soft fabric. An unlined bag can use a French seam instead, which encloses the raw edges without a second layer.