How to measure feet for shoes for kids
A plain guide to measuring a child's feet at home: tracing the foot, reading kids foot length, checking growing feet and choosing the right shoe size.
Contents
- Gather what you need before measuring
- Trace the foot while the child stands
- Measure kids foot length from heel to toe
- Add room for movement and growing feet
- Match the measurement to a shoe size chart
- Check the fit on the child's foot
- Re-measure growing feet as they change
- Avoid the usual measuring mistakes
- Kids foot measuring questions
- Do I measure both feet when buying shoes for kids?
- Should the child stand or sit during the measurement?
- How much room should be left in front of the toes?
- Can I use the shoe's size label instead of measuring?
- When should feet be measured again for a new pair?
You measure feet for shoes for kids by standing the child on a sheet of paper, tracing around the foot and measuring the longest distance from heel to toe. Compare that kids foot length with the size chart of the shoe you intend to buy. Repeat the measurement for both feet, because they can differ.
- Trace the foot while the child stands, since a standing foot spreads and gives a truer length.
- Measure heel to longest toe, then add a small allowance for movement and growing feet.
- Measure both feet and fit the larger one, because the two often differ.
- Check the fit with a thumb width of room at the toe and a snug heel.
- Re-measure growing feet at regular intervals rather than trusting an old number.
Gather what you need before measuring
Simple household items are enough for children's foot measurement, so no specialist tool is required. You need a sheet of paper, a pencil, a ruler or a tape measure and a flat wall or surface. A second adult helps keep a small child still.
Use paper longer than the foot so the heel and toes both sit on it with room to spare. Tape the sheet down so it cannot slide while the child stands. A hard floor gives a steadier result than a carpet.
Measure at the end of the day, when feet have had time to spread under the body's weight. Have the child wear the socks they will wear with the shoe. Thin and thick socks change the length you read.
Trace the foot while the child stands
The trace is the core of measuring feet for shoes for kids, and standing gives the honest length. Ask the child to stand with weight spread evenly and the heel against a wall if the paper allows. Place the foot flat and keep the toes relaxed.
Hold the pencil upright and draw close to the skin around the whole foot. Keep the line continuous from heel to toe and back along the other side. A tilted pencil adds length that the shoe does not need.
Mark the back of the heel and the tip of the longest toe on the paper as a backup. These two marks let you check the outline if the pencil line is unclear. Repeat the trace for the second foot on a fresh sheet.
Measure kids foot length from heel to toe
Kids foot length is the distance from the back of the heel to the tip of the longest toe, taken in a straight line. Lay the ruler flat along the trace and read both ends carefully. Write the number down before you move the paper.
The longest toe is not always the big toe, so check the outline rather than assuming. Measure to whichever toe reaches furthest. Read in millimeters or inches, then convert only once at the end.
Compare the two feet and keep the larger measurement for children's foot measurement. A difference between feet is normal and the shoe must fit the bigger one. Do not average the two numbers.
Add room for movement and growing feet
Growing feet need a little space beyond the measured length, and the amount depends on the shoe type and the child's age. A shoe that matches the foot exactly leaves no room for the toes to flex. Ask the seller how much allowance their size chart expects.
Add the allowance to the larger foot measurement, then look that number up on the chart. Charts differ between brands, so use the chart that belongs to the shoe you are buying. A size number from one maker does not carry across to another.
Allow more room in boots and closed shoes worn with thick socks, and less in soft first shoes. Younger children grow out of a size faster, so a slight extra margin helps the shoe last a season.
| Shoe type | Allowance to consider |
|---|---|
| Soft first shoes | Minimal extra length |
| Everyday closed shoes | Small allowance for toe movement |
| Boots with thick socks | Larger allowance for sock thickness |
| Sandals with open toes | Fit close to the measured length |
Match the measurement to a shoe size chart
Each brand publishes its own size chart, and the chart is the only reliable way to turn a measurement into a size. Find the chart on the product page or ask the seller for it. Read whether the chart shows foot length or inner shoe length.
Inner shoe length and foot length are different numbers, so a chart read the wrong way gives a poor fit. Foot length is what you measured; inner length is the space inside the finished shoe. Use the column that matches your measurement.
Between two sizes, choose the one that fits the larger foot with the allowance included. When the chart is unclear, ask the seller to confirm the inner length. Keep your written measurement so you can compare it with another chart later.
Check the fit on the child's foot
A measurement is a starting point, and the fit on the foot confirms whether the shoe works. Press gently at the toe to feel where the longest toe sits. There should be a small gap of room ahead of it.
Check the heel by walking behind the child and watching whether the shoe slips up and down. A heel that lifts means the shoe is too long or too wide. Feel along the sides for pressure points and ask the child to walk a few steps.
Watch how the child walks in the new shoes rather than relying on the size label. Limping, curling toes or pulling at the shoe can signal a poor fit. Return or exchange the pair when the fit is wrong.
Re-measure growing feet as they change
Growing feet change shape between purchases, so a measurement taken months ago is not a reliable guide. Check the length again before each new pair and write the date beside the number. Children's foot measurement is a repeated habit rather than a one-time task.
Feel inside the shoe for the toe position every few weeks and look for red marks on the skin after wear. Toes pressing the end of the shoe show that the allowance has gone. A shoe that once fitted can become too short without looking worn.
Keep the paper trace and the written numbers together so you can compare over time. A steady record shows how fast the foot is changing and helps when you shop without the child present. Replace the trace when the outline no longer matches the foot.
Avoid the usual measuring mistakes
The errors in measuring feet for shoes for kids cluster around movement, posture and reading the wrong number. A child who sits or curls the toes during the trace produces a length that is too short. Keep the foot flat and the weight on it.
A pencil held at an angle, a slipping sheet or a ruler placed off the straight line all distort the result. Check the marks against the outline before you trust the number. Measure twice and compare the two readings.
Trusting an old size number instead of a fresh measurement is the costliest mistake. Size labels vary between brands and change as the foot grows. Buy from the measurement and the chart, then confirm with a fit check.
Kids foot measuring questions
Do I measure both feet when buying shoes for kids?
Yes, measure both feet and use the larger measurement when you buy shoes for kids. The two feet often differ slightly in length, and a shoe must fit the bigger one. Averaging the numbers gives a shoe that pinches on one side.
Should the child stand or sit during the measurement?
The child should stand during the measurement so the foot takes the body's weight. A standing foot spreads and gives a longer, truer length than a sitting foot. Keep the heel down and the toes relaxed while you trace.
How much room should be left in front of the toes?
Leave a small gap of room in front of the longest toe, and the exact amount depends on the shoe type and sock thickness. A soft first shoe needs less extra length than a boot worn over thick socks. The brand's size chart shows the allowance its shoes are built for.
Can I use the shoe's size label instead of measuring?
No, a size label alone is unreliable because charts differ between brands and shoe types. Measure the foot and compare that length with the chart for the specific shoe. The label then confirms what the measurement already showed.
When should feet be measured again for a new pair?
Measure again before each new pair, and check the toe room inside the current shoes between purchases. Growing feet change length steadily, so an old number drifts out of date. A written record with dates makes the change easy to see.