# How to paint furniture step by step

Learn how to paint furniture step by step, from cleaning and sanding to priming, topcoats and curing time, so your dresser makeover lasts and looks even.

How to paint furniture step by step starts with surface preparation, not with the brush. Cleaning, sanding and priming decide whether the paint grips and wears well. The steps below cover a dresser makeover from degreasing the old finish through two coats and the curing time before you move the piece. 

## Clean and degrease before sanding 

Surface preparation begins with degreasing furniture so new paint can bond to the old finish. Kitchen pieces carry cooking film and dressers carry hand oils, and both stop paint from gripping. Wipe every panel, edge and drawer front with a degreasing cleaner, then rinse and let the wood dry fully. Scuff the surface with fine abrasive paper after cleaning, because sanding pushes grease deeper into the wood. 

## Sand, prime and choose a paint 

Sanding before painting creates a key that helps the primer and topcoat hold. Use a medium grit for gloss finishes and a finer grit for the final pass, then wipe away the dust. Priming comes next on bare wood, dark colors and repaired spots, because it blocks stains and evens the tone. Dresser paint types range from water-based acrylics to chalk paint, and each one sets its own drying time and topcoat needs. 

## Apply two coats and let them cure 

A brush and roller pair covers flat panels quickly and reaches corners and moldings cleanly. Lay on thin coats rather than one heavy layer, and let each coat dry before the next. Two coats give even color and a surface that resists wear on edges and drawer fronts. Paint curing time runs beyond the drying time, so leave the piece undisturbed until the finish hardens. 

## Questions about painting furniture 

### How do I clean painted furniture before repainting? 

Cleaning painted furniture before repainting means removing grease, dust and wax from the old surface. Wash the piece with a degreasing cleaner, rinse with clean water and let it dry completely. Sand the surface lightly after cleaning so the new paint has a key to grip. Any sticky residue left on the finish will show through the new coats. 

### How long should paint cure before moving furniture? 

Paint curing time depends on the paint type, the number of coats, the room temperature and the humidity. A water-based paint feels dry within hours, yet the film keeps hardening for far longer. Wait until the surface no longer feels tacky and resists a light fingernail press on a hidden spot. Move the piece by lifting it rather than dragging it, and keep heavy objects off the top for a while. 

### What paint works for a DIY dresser makeover? 

A DIY dresser makeover works with water-based acrylic paint for a hardwearing finish or chalk paint for a matte look with little prep. Pick a paint made for furniture rather than wall paint, and check whether it needs a separate topcoat. Dark colors cover better over a primer, while light colors may need an extra coat. Test the paint on the back of a drawer first. 

### How should I paint dresser drawers so they do not stick? 

Painting dresser drawers needs thin coats and attention to the edges that slide in the frame. Paint the drawer fronts and sides, but keep paint out of the runner grooves and the inside of the box. Let each coat dry fully before you refit the drawer, and sand any ridge that forms on a contact edge. Curing the paint before use stops the surfaces from bonding together.
