# Press-on nail sizing chart and printable chart template

How to read a press-on nail sizing chart, measure your nail beds and print a sizing card template for hands and toes before you order a custom set.

A press-on nail sizing chart matches each nail to a number by width in millimeters, so a set fits your own nail beds. You measure across the widest part of each nail, compare the numbers with the chart and write the result down. A printable chart template lets you keep those numbers on hand for every order. 

- Measure each nail across its widest point in millimeters, then match that width to a number on the chart.
- Sizes are not the same across brands, so check the specific chart that comes with the set you buy.
- Toenails need their own measurements because their width and curve differ from fingernails.
- A printable sizing card template keeps your numbers ready for repeat orders.
- Ordering a spare size in the two widest nails gives you room to adjust.
 

## What a press-on sizing chart shows 

A press-on nail sizing chart pairs a size number with a nail width in millimeters. The chart lists sizes from the smallest to the largest, and each row gives the width that nail should cover. You read the chart from your own measurements rather than guessing from a photo. 

Sizing charts focus on width because length and shape are chosen separately. Two nails of the same width can carry very different shapes, from square to almond, and the width decides the fit. The chart answers which size sits flat on your nail bed without pinching or lifting. 

Every maker builds its own size scale and its own nail sizing numbers. A size 3 from one chart may not match a size 3 from another, so treat each chart as its own system. Keep the chart from each order with your measurements written on it. 

## How to measure your nail beds 

Nail bed measurements start with a soft tape or a strip of paper and a ruler marked in millimeters. Lay the tape across the nail at its widest point, just above the sidewalls, and note the width. Press the tape flat against the nail rather than curving it around the finger. 

Measure each finger separately because the two hands are not mirror images in size. Record the thumb first, then work from the index finger to the little finger on each hand. Write the millimeter width beside each finger name so you do not lose the order. 

Take each measurement twice and use the wider reading when the two differ. A nail that curves strongly can read narrow on a flat tape, so check the sides of the nail as well. Clean, dry nails give a steadier reading than nails with oil or lotion on them. 

## Turning measurements into size numbers 

A nail width chart converts each millimeter reading into the size number you order. Find the row whose width sits closest to your measurement, then note the size beside that finger. When your width falls between two rows, choose the larger size and file the sides down to fit. 

Nail size numbers run from small to large across the chart, and the order of numbers can differ between makers. Read the column headings before you write anything down. A chart may label the smallest nail as 0 or as 9, so the number alone tells you nothing without its chart. 

Custom sets often ask for a full list of sizes rather than a single size. Send the numbers for all ten fingers in a clear order, from thumb to little finger on each hand. Note any finger that sits between sizes so the maker can allow for it. 

## Building your printable sizing chart template 

A printable chart template is a page you fill in once and reuse for later orders. Set out a row for each finger of each hand, with a column for the millimeter width and a column for the size number. Leave a second size column for the chart of a different maker. 

A sizing card template works the same way in a smaller format that fits a wallet or a phone case. Print the card at full size and check a ruler against the printed scale before you trust it. Printer settings that shrink the page will shrink the scale with it. 

Print the template on plain paper and write in pencil so you can update a number after a new measurement. Add the name of the maker beside each size column, because the numbers belong to that chart. Store the filled card with your nail tools so it is there at the next order. 
| Field on the template | What you write | 
| Finger and hand | Left thumb, right thumb, and so on | 
| Width in millimeters | The reading across the widest point | 
| Size number | The row from that maker's chart | 
| Maker name | The chart the number belongs to | 
| Notes | Nails that sit between two sizes |  

## Sizing press-on toenails 

A toenail press on size chart follows the same idea as a fingernail chart but uses its own scale. Toenails are wider and flatter than fingernails, so fingernail sizes rarely carry over. Measure each toe across its widest point and match the reading to the toenail chart. 

Toenail press-on sizes often cover the big toe separately from the smaller toes. The big toe needs its own measurement because it is far wider than the rest. Record the big toe first, then the four smaller toes on each foot. 

The curve of a toenail affects fit more than its width alone suggests. A flatter press-on shape sits better on a flat toenail, and a curved shape suits a domed nail. Mention the curve when you send measurements so the maker can match the shape. 

## Why sizes differ between makers 

Press-on nail size charts are not standardized, so each maker sets its own width ranges. One chart may spread ten sizes across a narrow range of widths and another across a wide one. The same finger can land on different numbers in two charts. 

Nail shape adds a second difference because a stiletto and a square nail of equal width feel different. The shape changes where the nail meets the sidewall and how much of the natural nail it covers. Check the shape notes beside the chart before you settle on a size. 

A sizing chart template that records the maker name protects you from mixing numbers. Write the chart source beside every size you note down. When you switch makers, measure again rather than copying the old numbers across. 

## Checking the fit before you commit 

A dry fit check shows whether a size sits correctly before any adhesive goes on. Rest the press-on on the bare nail and look at the sidewalls on both sides. The nail should cover the width without pressing into the skin at either edge. 

A press-on that overhangs the sidewall will lift at the edge, and one that sits narrow leaves a gap. Both problems come from a size that is too large or too small for that finger. Move one size up or down on the chart and test again. 

Ordering a spare in the widest nails gives you a fallback when a size feels wrong on the day. The thumb and the middle finger carry the widest beds for many hands, so those spares earn their place. Keep spare sizes with your sizing card for the next set. 

## Press-On Nail Sizing Questions 

### How do I read a press-on nail sizing chart? 

You read a press-on nail sizing chart by matching your measured nail width in millimeters to the closest row. Note the size number beside that row for each finger. Check the maker name on the chart first, because size numbers do not carry between charts. 

### Is there a printable press-on nail sizing chart template? 

Yes, a printable sizing chart template sets out a row for each finger with space for the width and size number. Print it at full size and check a ruler against the printed scale. A smaller sizing card template version fits in a wallet or phone case. 

### Do toenails use the same size chart as fingernails? 

No, a toenail press on size chart uses its own scale because toenails are wider and flatter. Measure each toe across its widest point and match it to the toenail chart. Fingernail sizes rarely transfer to the toes. 

### What if my nail width falls between two sizes? 

Choose the larger of the two sizes when your width falls between rows on the chart. File the sides of the press-on down until it sits inside the sidewalls. A size that is slightly large can be adjusted, while a narrow one leaves a gap. 

### Why is my size number different from another brand? 

Your size number differs because each maker sets its own width ranges and numbering order. One chart may call the smallest nail 0 and another may call it 9. Measure again for each new chart instead of copying the old number.
