Types of wood furniture finishes with examples
A plain guide to wood furniture finish types, from oil and wax to lacquer, shellac, varnish and polyurethane, with examples of how each looks and wears.
Contents
- Oil and wax finishes
- Shellac and French polish
- Lacquer, varnish and polyurethane
- Questions about wood furniture finishes
- What are examples of finishes for wood furniture?
- How do furniture finish types differ in how they wear?
- Should I choose a water-based or oil-based finish?
- What does a wood sealer do before the finish?
Types of wood furniture finishes with examples cover the main families used on furniture: oil, wax, shellac, lacquer, varnish and polyurethane. Each finish changes how the wood looks and how it handles spills, heat and touch, so the choice is about the surface you want rather than a single correct answer. The sections below explain what each finish is, what it looks like on a piece, and what it asks of you in return.
Oil and wax finishes
Oil finishes soak into the wood instead of sitting on top, so the grain stays visible and the surface feels close to raw timber. Tung oil and linseed-based products are the usual examples, and they leave a soft, low-sheen look that suits oak, walnut and other open-grained woods. Wax finish adds a thin protective layer over oil or bare wood and gives a smooth, matte touch. Both oil and wax need refreshing from time to time, and they offer less resistance to water rings and heat than a film finish.
Shellac and French polish
Shellac is a resin dissolved in alcohol and brushed or padded onto wood, and it dries fast enough to build a thin film in a workshop session. French polish is the padded technique that layers shellac into a deep, glossy sheen, and it appears on antique and reproduction furniture. Shellac takes color and tint well, which makes it useful for warming pale woods. The film is sensitive to alcohol and water, so a shellac surface on a dining table needs coasters and care.
Lacquer, varnish and polyurethane
Lacquer, varnish and polyurethane are film finishes that sit on the surface and protect the wood beneath. Lacquer dries quickly and can be sprayed to a smooth factory finish, while varnish and polyurethane are brushed on and build a durable layer that resists moisture and wear. Water-based and oil-based versions exist for these products, and the water-based types dry faster with less odor. A wood sealer is applied before the topcoat to limit how much finish the grain absorbs. Spraying lacquer or solvent varnish needs ventilation and skill, so a trained specialist handles those jobs.
Questions about wood furniture finishes
What are examples of finishes for wood furniture?
Examples of finishes for wood furniture include oil, wax, shellac, lacquer, varnish and polyurethane. Oil and wax sit close to the wood and keep a natural look, while shellac, lacquer, varnish and polyurethane form a film on top. Tung oil and French polish are specific examples within the oil and shellac families.
How do furniture finish types differ in how they wear?
Furniture finish types differ mainly in whether they soak into the wood or form a film on top. Oil and wax stay close to the surface and can be refreshed by hand, but they offer less resistance to water and heat. Lacquer, varnish and polyurethane build a protective film that handles daily use better, at the cost of a more visible coating.
Should I choose a water-based or oil-based finish?
A water-based finish dries faster and carries less odor, which suits indoor work where ventilation is limited. An oil-based finish often deepens the color of the wood and gives a warmer tone. The choice depends on the look you want and on how much drying time and ventilation your workspace allows.
What does a wood sealer do before the finish?
A wood sealer is applied before the topcoat to control how evenly the wood absorbs the finish. Sealer limits blotching on porous woods and helps the topcoat sit uniformly. On some finishes the sealer is optional, and on others it is part of the system the maker specifies.